Wood Pellet Mill
)
Factory
Wood Pellet Mill
Particle output :150-200kg/h
Diameter of pellet: 2.5-6 mm
Body weight: 100kg
Body size: 105 * 40 * 70(cm)
XKJ105-550 wood pellet machine mill
wood pellet mill is mainly applied to biomass material, make the biomass fuel pellets (wood pellet). The diameter of input materials is 2-6mm, the smaller the better. The moisture of raw materials is about 13%, the moisture of finished pellets is about 10%. The machines can be both with motor and diesel engine can satisfy the different customers' requirements.
XKJ series of flat die pellet mill is on the basis of the circular motion of machinery, motor driven, driving gear delivered to spindle and dies, the friction of the roller's rotation so that pressing wheel and die between very high temperature, powdery friction materials through high-temperature viscosity, protein and lipid solidification degeneration in the roller's extrusion hole from die extrusion, then by a rejection of a wheel is made of particles by outlet sent out..
Specification:
|
Type |
Motor power |
Diameter of pellet |
Capacity |
|
SKJ-105 |
2.2 kw |
2.5-6 mm |
50-80kg/hour |
|
SKJ-120 |
2.2 kw |
2.5-6 mm |
80-100kg/hour |
XKJ150
Motor: YL132S4 5.5kw
Flat die diameter: 150mm
Membrane pore size: diameter 2.5mm, diameter 3mm, diameter 4mm, 6mm diameter
Grain moisture content: less than 10% of raw materials
Particle output :150-200kg / h
Body size: 105 * 40 * 70(cm)
Body weight: 100kg
XKJ200
Motor: 11 kw
Flat die diameter: 200 mm
Ping-mode speed: 366r/min
Die hole size: diameter 2.5,3,4,6
Grain moisture content: less than 10% of raw materials
Particle output :200-300kg / h
Body size:05 * 40 * 80
Weight:124kg
City: Sacramento
Languages spoken: English
Address:
Contact person:
Phone:
Fax:
Mobile:
